Acala- Full-Size Titanium Folding Knife | M390 Blade

Ready to Carry Something That Feels Serious?

Most EDC knives are built small.

Easy to carry. Easy to forget.

But when it comes time to actually use them- they fall short.

Acala was built differently.

Larger blade
Fuller grip
Stronger lock
More control in every cut
Because real tasks don’t scale down.

When Size, Strength, & Control Actually Matter.

Grade 5 Titanium Frame
M390 Premium Blade
222mm Full-Length Profile
Flexible Opening Posture
4-Position Pocket Carry

The Kogarasu Geometry: Ancient Soul, Modern Utility

The Acala’s blade is a re-engineered evolution of the legendary 8th-century Kogarasu-maru (The "Little Crow") Katana. We’ve taken this historic Japanese profile and optimized it for the modern pocket.

Hybrid Performance: Combines the piercing power of a needle-point with the deep slicing "belly" of a curved blade.
Reinforced Spine: A thicker, modified tip designed to handle "nasty" tasks without the fear of chipping or breaking.
Modern Optimization: We’ve refined the traditional geometry to maximize edge contact, making it more efficient for daily cutting.
Effortless Maintenance: The sweeping curve isn’t just for looks—it’s designed to make DIY resharpening fast, consistent, and foolproof.
Born for Use: High-performance M390 steel meets a geometry that thrives under pressure. No babying required.

Better Where It Matters

A larger knife only makes sense, if it improves everything else.

With Acala, it does:

More leverage when cutting
More control in hand
More confidence under pressure

No compromise. Just capability.

The Blade — M390. Built to Perform.

While others offer a sliver of steel, the Acala provides a foundation. We’ve combined nearly double the volume of premium M390 with a modified Kogarasu geometry to create the ultimate cutting tool.

Premium Blade Steel: For Exceptional edge retention; High corrosion resistance, and Clean, precise cutting
Extreme M390 Volume: Not just longer, but significantly thicker. This extra mass provides the lateral strength needed for tasks that would snap a standard folder.
Refined Geometry: Meticulously ground to balance a reinforced spine with a razor-sharp edge. It slices like a scalpel but carries the power of a heavy-duty instrument.

You don’t baby it. You rely on it.

Acala, PM 2, UTX70, Blade Size Comparison:

Full Size. Full Control.

My philosophy is simple: A big knife does everything a small knife can—only easier. Wood, zip ties, or aluminum; to the Acala, it’s all just butter. This size isn’t for show. It gives you:

A full, confident grip
Better cutting stability
Real working performance

Once you get used to it- smaller knives feel incomplete.

Titanium Frame — Strength You Can Feel

Grade 5 titanium construction
CNC precision machined
Corrosion resistant

The standard version is finished with a fine ceramic beadblast texture:

Smooth, jade-like feel
Subtle, refined matte surface
Resistant to wear and fingerprints

It doesn’t just look premium. It feels premium.

A Robust Frame Lock You Can Trust

To ensure your Acala lasts a lifetime, we’ve included a hardened steel insert at the lock-up point. This prevents "lock-stick" and ensures the Titanium frame doesn't wear down against the M390 steel blade, keeping the lock-up rock solid for decades.

Reinforced lock bar structure
Steel lock-bar insert
Strong, stable engagement
Built for repeated, long-term use

No play, No flex, No hesitation.

This is the kind of lock- you stop thinking about, because it never fails.

Dynamic Engagement: Fluid in Every Gesture

Different moments. Different preferences. The same perfect action.

Two Deployment Points. Infinite Tactile Joy.

Thumb Stud — controlled, precise
Front Flipper — smooth, refined

All tuned with:

Extra-thick oil reservoir brass washers
Balanced detent strength

The Workhorse Pivot: Why CNC Machined Washers?

Instead of using thin ceramic bearings for "flick-factor," the Acala uses two large CNC-machined brass washers. Why? Because a tool meant for "nasty" tasks needs a foundation that won't crumble.

Lateral Stability: Massive surface contact eliminates blade play during heavy prying, where bearings often fail or deform.
Debris Resistance: Washers push dirt out instead of trapping it. Reliable in mud, dust, and real-world grit.
"Hydraulic" Feel: A smooth, deliberate action that actually improves with use as the brass seasons against the steel.
Indestructible Build: No tiny balls to rust, crush, or lose. A simple, fail-safe system with zero maintenance anxiety.
Even Load Distribution: Spreads force across the frame during high-pressure "choking" work—the stability of a tank tread over a racing tire.

Ergonomics That Actually Work

We meticulously sculpted the titanium frame to ensure that no matter how you choose to engage, the knife feels like a natural extension of your hand. From the rounded jimping that protects your thumb to the index-milling that locks your hand in place, this is a tool that thrives in every gesture. It’s a workhorse that doesn't just do the job—it honors the way you work.

Contoured handle for full-hand grip
CNC-machined jimping for control
Easy choke-up for precision tasks

Whether you are

choking up for surgical precision on a delicate DIY project...
hammer-gripping to power through thick industrial zip-ties...
draw-cutting through heavy leather or scoring a precise line...

The Acala adapts instantly.

Carry It Your Way: 4-Position Pocket Clip

Tip-up / Tip-down
Left-hand / Right-hand

Adapt it to your carry style- not the other way around.

Internally Milled Frame: Strength & Lightweight

While the Acala has a bold, "immovable" silhouette, we utilized Internal Weight Relief (stealth milling) inside the Titanium frames. This removes unnecessary weight where you can't see it, giving you a full-sized workhorse that carries as comfortably as a much smaller knife.

True strength isn't just about being "heavy"—it's about being dependable without being a burden.

Never Lose It in The Dark-Tritium Slot System

Three dedicated tritium positions (One on each side of the front flipper, one on the pocket clip).
Fully customizable colors
Visible in complete darkness

Not just for looks. It makes your knife:

Easier to locate
Faster to grab
Unmistakably yours

Four Finishes for Every Vibe

The Acala is a masterclass in utility, but utility is never "one size fits all." We believe your daily driver should be a reflection of your own style and spirit. Whether you prefer the clean look of a modern tool or the battle-worn aesthetic of a seasoned workhorse, we have a finish that speaks your language.

Standard Ceramic Beadblast: The classic Acala look. Silky, matte, and sophisticated—perfect for the minimalist who appreciates clean engineering.
Black Stonewashed: For those who live by the "No Babying" rule. This rugged finish hides the scars of hard work and looks better the more you use it.
Brushed Titanium: A premium, hand-finished aesthetic that catches the light and highlights the Acala’s streamlined architecture.
DLC Black: The ultimate stealth option. Diamond-Like Carbon coating provides an incredibly hard, tactical surface that is as tough as it is mysterious.

Exceptional Volume. Lifetime Value.

While other knives cut corners to save on costs, we chose to overbuild. When you invest in an Acala, you are getting significantly more high-performance material for your money.

A Design That Speaks for Itself

Open or closed— Acala carries a distinct, intentional presence.

Strong visual lines
Balanced proportions
Mechanical precision aesthetic

It doesn’t try to look aggressive. It simply looks… right.

Maintenance: One Tool. One Standard. Total Access.

A true workhorse should be easy to care for. We despise proprietary screws and over-complicated hardware that keep you away from your tool. That’s why the Acala is engineered for total simplicity: the entire knife can be disassembled, cleaned, and tuned using just one standard T8 Torx driver. No puzzles, no frustration—just efficient engineering for a lifetime of use.

[Watch: The Acala Teardown]

Specifications

Forge Your Legacy: Custom Laser Engraving

A tool as durable as the Acala is destined to be passed down. You can transform your "Workhorse" into a personal landmark or the ultimate personalized gift for a fellow enthusiast.

Personal Identity: Add your name, initials, or a significant date to the Grade 5 Titanium frame.
The Ultimate Gift: Nothing says "Iron-Blooded Tenderness" like a high-end tool engraved with a message for someone you respect.
Precision Marking: Our high-output laser ensures your customization is as permanent and resilient as the M390 steel itself.
Endless Options: Whether it's a meaningful quote, GPS coordinates, or a clean minimalist monogram, we make it yours.

Complete the Carry: Custom Titanium Beads

Don't let your Acala go naked. Our CNC-machined Titanium beads are the perfect tactile companion, featuring a rugged beadblast finish and unique, hand-carved anodized accents. It’s a small, high-impact upgrade that adds both draw-leverage and personality to your pocket. Add one to your pledge—your lanyard will thank you.

Reminder about Shipping Costs

Please Note: Pledge amounts do not include shipping, VAT, or import duties. These costs will be calculated and collected via the post-campaign survey once the project ends. Please refer to the estimated shipping chart below.

The Road to Acala: Project Timeline

This project is promoted by Jellop, the ad tech power behind the best Kickstarters with 3,500+ successful Kickstarter projects with over $1B raised between them.

Acala Dream Series Titanium Folding Knife | M390 Blade

Tài liệu dự án