3 in 1 Everyday ITA Bag v4 : Scratch Resistant Thick Cotton edition

🎒 1 bag -3 modes. Scratch resistant pin display. 2 pin pads . Tear resistant cotton made to last.
Every day is different and now your bag's style and theme can change with it.
This is the 10th collection of our Everyday Ita bag series. 10 years, 40+ campaigns, 5,000+ bags. We know exactly where ITA bags fail because we've been fixing those problems with every generation. The 15" 3 in 1 ITA Bag v4 is everything we've learned, built into one bag.

The 15" 3 in 1 ITA Bag v4 switches between three carry modes, and all the straps tuck away completely when you don't need them. No bunching. No creasing. No digging around.

Backpack: EVA foam straps (yoga-mat grade). Breathable, reinforced edging, triple-stitched at every stress point. Comfortable even fully loaded.

15" Laptop Bag: Detach and hide all straps for a clean, minimal carry. Padded sleeve with elastic retention protects up to 15" devices or A4 documents. Your laptop stays put even when you're moving.

Cross Body: Detachable padded strap, 80 to 140cm adjustable. Anti-theft pocket sits at your hip for quick access to your phone, wallet, or transit card.

💡 Minimal mode: Want to lose the pins for a day? Pull out the pin pad and use the front window as a see-through pocket for everyday accessories.

🌏 Global shipping 💸 Pledge over Time available

Scratch Resistant High Optical Clarity Window

This is an ITA bag. Your collection comes first.

The previous bag came with one pin insert. The 15" 3 in 1 ITA Bag v4 comes with two, so you always have a second themed display ready to swap in. Con mode. Daily mode. Soft hours. Game night. Switch your whole layout in minutes instead of re-pinning everything from scratch.

The Velcro is now one unified strip instead of segmented sections, so it holds heavier pins without gaps messing up your layout. Each pad pops out easily and works with rubber, butterfly, and locking clasps.

7 D-rings and 4 lobster clasps give you clip-in points for keychains, charms, plushies, AirTags, and whatever else your collection needs. Inside and outside the bag.

Pin backings stay in their own dedicated compartment so they don't scratch your other stuff or float loose inside the bag.
The 3-edge zip opens the entire display window so you can restyle your layout without fishing with your hand to reach and swap pins.

🔪 Scratch-Resistant Window

This was the number one request from our community. You wanted a window that doesn't haze, scuff, or crinkle after wearing or rubbing and bumping. We tested materials for months to find something that holds up to real daily use. The new 0.8mm thick TPU survives bumps, shoves, leaning against walls and seats, bags getting tossed around at cons...Its the stuff strong phone cases are made of + car decals use.

With phone-case-grade TPU you also get maximum optical clarity and less of the warping and glare or yellowing you get with PVC.

Bag Design Update: As of 12.5.25 we are updating the bag design with a luggage strap which was a favourite feature of our 18" Ita bag.

🏋️Quality upgrades last years & prevent tearing.

🛡️ We made this bag so you don't have to replace it anytime soon.

12oz heavyweight cotton exterior. Tear-resistant, thick, scratch-resistant. This is not standard-weight cotton.

Heavyweight nylon reinforcement at the handles, cross body strap, and base. These are the three zones that wear out fastest on any bag. We reinforced all of them.

Triple-stitched strap connections. Cross-stitch plus double reinforcement at every stress point where straps meet the bag body.

YKK-grade waterproof zippers. Water-resistant on the main compartment and key openings. Rain at a con? You're fine.

Fully enclosed top zipper. The whole top of the bag zips shut. Nothing falls out.

All-metal hardware throughout. D-rings, lobster clasps, buttons. All metal. No cheap plastic that snaps or discolours.

Structured thick polyester interior lining. The bag stands up on its own and holds its shape over years of use.

---

Had a Pinbuds bag before? Here's what's changed.

Earlybird bundle backer rewards include free organiser bags, accessories, pins, charms and mystery items. All selections confirmed in the BackerKit survey after funding. These freebie deals available exclusively through backing in Kickstarter

🆓 Earlybird Pledge Comes Loaded with Freebies

Back our project to get rewarded with freebies and discounts. The more you pledge, the more rewards and freebies you unlock. This is our way of saying thanks for showing up on day one.

Free accessories included with every tier: enamel pins, acrylic charms, bag charms, air fresheners and more.
Mix and match from our freebie catalogue: 50+ pin designs, 50+ charm designs, 10+ bag charms and 15+ air fresheners.
You pick your exact designs in the backer survey after the campaign with a limit of 1 per design choice in your rewards.

(Freebies subject to availability at time of your survey submission. Late redemptions can result in some choices being sold out.)

HOW KICKSTARTER REWARDS WORK

1.Back the campaign by choosing your pledge tier before the campaign ends.

2.Once funded, you'll receive a BackerKit survey (early [Month]) where you confirm your shipping address, pick your bag colourway (if applicable), and select your freebie accessories from the full catalogue.

This is where you lock in your exact pin, charm, bag charm, and air freshener choices. Take your time and pick your favourites. (Be sure to redeem on time as delayed redemptions mean some choices can sell out.)

3.We finalise production, run quality control, and pack every order with your specific picks.

Orders ship globally with tracking. Rewards arrive from [Month]:
🇦🇺 Australia: 2 to 4 business days after dispatch
🇺🇸 US: 2 to 5 business days after dispatch
🌏 Rest of World: 3 to 10 business days after dispatch

Shipping costs are collected after the campaign through the BackerKit survey, closer to fulfilment. This lets us calculate accurate costs based on your location, reward weight, and shipping method. You'll see the final shipping cost before you lock in your survey.

🇦🇺 Australia. All pledge prices include GST. You only pay domestic shipping during the survey. Estimated delivery: 2 to 4 business days after dispatch.

🇺🇸 United States.US orders ship via FedEx Express as Delivered Duties Paid (DDP). All import duties, customs fees, and taxes are covered upfront. During the survey, you pay the shipping cost and import duties together, so your shipment gets customs pre-cleared. Nothing to pay when your package arrives. Estimated delivery: 2 to 5 business days after dispatch.

🌏 Rest of World.Shipping collected during the BackerKit survey. Your local customs authority may charge additional import duties or taxes on arrival. These charges are outside our control and are not included in your pledge price or shipping cost. Estimated delivery: 4 to 15 business days after dispatch, depending on your local postal service.

🏭Higher quality materials & levelled up manufacturing

We've moved production to a new factory partner who specialises in outdoor and sports bag construction.

Every unit gets quality control reviewed against our spec sheet before it ships & packs to our instructions to avoid crumpling or creasing risks.
They've been involved since prototyping, not just handed a finished brief at the end
Engineering tweaks happen on the factory floor, so design details don't drift between sample and production
The bag landing on your doorstep should match what you see in our campaign photos
Improved foam packaging will line the internal and external window to avoid any issues with the 15" bag getting externally damaged upon shipment.

ABOUT PINBUDS & PAST BAG REVIEWS

We're a couple based in Sydney, Australia. We've been designing ITA bags, enamel pins, and accessories since 2016, and we've shipped over 40 crowdfunding campaigns across Kickstarter and BackerKit.

What started as a love for art, collecting, and fandom culture has turned into a focused effort to make bags that collectors actually want to use every day. Not just display pieces for events, but real everyday carry that happens to have a window for your pins.

Every design we release is shaped by community feedback. We read every comment, every message, every review. The new 3 in 1 ITA bag exists because people kept asking for something bigger, tougher, more versatile, and built to last longer than usual ita bags and can handle the daily grind or switch up for convention mode.

When we're not designing or fulfilling orders, we're in the artist alley at conventions across Australia, New Zealand, and Japan. Meeting people face to face and seeing our bags out in the wild, and how you decorate them, is the best part of what we do.

5,000+ bags shipped. 40+ campaigns fulfilled. Your order is in experienced hands.🫶

🔀 How to Switch Bag Modes

3 in 1 Everyday ITA Bag v4 : Scratch Resistant Thick Cotton edition

2 Pin pads included swap themes fast

Scratch Proof Window Display Pins & Charms

Scratch Resistant High Optical Clarity Window

🔪 Scratch-Resistant Window

What fits in this bag?

🏋️Quality upgrades last years & prevent tearing.

What's new vs original 3 in 1 ITA?

🎁Backer Reward Earlybird Tiers

Reward: Pins/Charms/AirF Choices

Project Fulfilment timeline

🏭Higher quality materials & levelled up manufacturing

ABOUT PINBUDS & PAST BAG REVIEWS

3 in 1 Everyday ITA Bag: Scratch Resist Backpack+crossbody

Tài liệu dự án